Check controll for the electrical kit – what is it and how does it work?

What must be payed attention to concerning vehicles’ check controll?
A vehicle’s electronics are not only complicated but also finely calibrated, therefore, even small interventions can have a huge impact. For vehicle’s which entail check controll the electrical kit must hence be conceptualized in a way that ensures the tap of the lighting functions before the lamp test device takes place.
A different solution is to use an electrical kit with a special trailer control device, where lamp currents are generated for the trailer from the vehicle battery out. Incidentally, such a cable set is also strongly recommended for vehicles with too small cable cross-sections (<0.752). We already pay close attention to this when designing and developing our electrical kits. So you just have to make sure when buying that the electrical kit is suitable for vehicles with check-control.
Electric kits with trailer control unit MVG-type 4112
Our electric kits, which are fitted with a trailer control unit of the MVG-Type 4112, are ideally suited for vehicles with check-control and / or with insufficient cable cross-sections (<0.752). You also benefit from the following product advantages:
- Short-circuit proof outputs of the trailer lighting functions
- Suitable for both LED and incandescent trailers
- Microprocessor controlled
- Monitoring of the charging line / charging active with the engine running and a light function
- Made in Germany