Explaining the MVG systems 2010, 2040 and 2080

24. August 2018 um 16:28

MVG systemsWith our products, you often come across the number codes 2010, 2040 and 2080. We explain what the codes actually stand for and where they are relevant for you. The codes refer to MVG systems. These designate different models of trailer hitches, but give no further information as to which vehicle the system is suitable for.

 

The MVG systems explained in a simple manner

The system 2010 – always ready with the rigid trailer hitch

It is probably the easiest system to explain. The code 2010 designates the rigid trailer hitches at MVG. The ball bar is firmly welded to the cross member. On some models we also offer  an optional replaceable plate system. Here you can exchange the rigid AHK on a removable plate for a jaw clutch and are flexible as you can attach a variety of pendants. This is often helpful, especially for powerful models like the current pick ups.

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

 

Our system 2040 – mounted in no time

The System 2040 is the successor of the System 2020, both codes stand for our removable system. With our detachable trailer hitches, you can remove the ball bar at any time flexibly and store it when not in use in the trunk. To remove the ball rod, you simply operate our wheel. The assembly is easy and you can take the towbar in no time in operation. Also, the socket holder is foldable, so you can not see anything on the vehicle, if you do not use the trailer hitch.

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

 

The System 2080 – the swiveling solution for your vehicle

With the code 2080 we refer to our swiveling trailer hitch. You can not remove the ball bar, but the ball bar can be pivoted away when the trailer hitch is not needed. It disappears inconspicuously behind the bumper. Also, the operation is done for you via a hand wheel. It only takes a few steps to assemble the ball bar and also to disassemble it again. Again, the socket holder is simply foldable, so that the AHK is not noticeable when it is not needed.

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

The detachable towbar for Dacia Duster II

12. März 2018 um 17:39

Dacia Duster II

The Dacia Duster II goes to the next round: Since December 2017 the Dacia Duster II is on the market, the popular allrounder has been reissued and excites as a family vehicle ever since. Further, it offers enough space for kit and caboodle. In order to turn the Dacia Duster II into a towing vehicle, we offer the matching towbar for an easy retrofit.

Our detachable towbar can be detached by the use of a twist grip and can thus easily be handled. Whenever the towbar is not needed, it is simply detached. No interventions are necessary concerning the vehicle’s design. The towbar fascinates due to its simply handling.

Dacia Duster II

 

The benefits of the detachable towbar for Dacia Duster II

  • vertically detachable towbar, MVG towbar 2040 
  • no visible cut-out required
  • automatic system removal by twist grip
  • automatic locking device when fitting
  • easy handling
  • vehicle-specific eletrical kit, 13-pin, 12 Volt, rear fog lamp shutdow,  parking assistance system car-mounted, electronic warning device, LED compatible

[button link=“https://www.mvg-ahk.de/en/Towbars/DACIA/Duster/Duster-II-also-4-X-4-SR-12-2017/“ icon=“chevron-right“ window=“yes“ color=“red“]Check out towbar[/button]

Technical data for detachable towbar for Dacia Duster II from 12/2017

  • D-value: 8,4 kN
  • Towing capacity: 1598 kg
  • Trailer load: 90 kg

The towbar for your Dacia Duster from 12/2017 can be found in our MVG-shop. The item number is 0957 GS3.

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

Detachable towbar for Ford Mondeo

17. November 2017 um 16:23

Ford MondeoAs a popular allrounder the Ford Mondeo is often used as a family vehicle. It offers a lot of space and comfort along with modern design. Using the matching towbar for retrofitting the Ford Mondeo can easily be turned into a towing vehicle as well. We offer a detachable towbar, which can easily be retrofitted and is easy in its use. The towbar can be detached using a twist grip, it requires no cut-out and thus does not interfere with the modern design and optic of the Ford. The towbar fits saloon as well as estate models.

 

Ford Mondeo

 

The benefits of the detachable towbar for Ford Mondeo estate and saloons models from 01/2015

  • vertically detachable towbar, MVG towbar 2040 
  • no visible cut-out required
  • automatic system removal by twist grip
  • automatic locking device when fitting
  • vehicle-specific eletrical kit, 13-pin, 12 Volt, rear fog lamp shutdown and parking assistance system, CAN databus

[button link=“https://www.mvg-ahk.de/en/Towbars/FORD/Mondeo-Estate/Mondeo-Estate-01-2015/“ icon=“chevron-right“ window=“yes“ color=“red“]Check out towbar[/button]

Technical data for detachable towbar for

Ford Mondeo estate and saloons models from 01/2015

  • D-value: 12,1 kN
  • Towing capacity: 2550 kg
  • Trailer load: 102 kg

The detachable towbar for your Ford Mondeo estate and saloon models from 01/2015 can be found in our MVG-shop. The item number is 1746 AS.

.

Check out the video for our product as well:

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

New at MVG: Detachable towbar for Opel Mokka

9. November 2017 um 15:52

Opel MokkaThe Opel Mokka is among the most popular vehicles in the German car market. As a modern SUV he takes the attention he requires and delights with its looks and comforts. However, in order to turn the Opel in a towing vehicle, a fitting towbar is needed. We offer a detachable towbar which can easily be retrofitted and turns the Mokka into a strong partner for your next trailer ride.

Our detachable towbar can easily be used and with only a few hand grips it can be detached using the twist grip. The demanding optics ensure a towbar matching the design of the Opel Mokka.

Opel Mokka

 

The benefits of the detachable towbar for Opel Mokka 11/2012 model

  • vertically detachable towbar, MVG towbar 2040 
  • demanding optics
  • automatic system removal by twist grip
  • automatic locking device when fitting
  • vehicle-specific eletrical kit, 13-pin, 12 Volt, rear fog lamp shutdown and parking assistance system, CAN databus, LED compatible

[button link=“https://www.mvg-ahk.de/en/Towbars/OPEL-VAUXHALL/Mokka-Mokka-X/Mokka-11-2012-08-2016/“ icon=“chevron-right“ window=“yes“ color=“red“]Check out towbar[/button]

Technical data for detachable towbar for Opel Mokka 11/2012 model

  • D-value: 8,75 kN
  • Towing capacity: 1500 kg
  • Trailer load: 75 kg

The detachable towbar for your Opel Mokka 11/2012 model can be found in our MVG-shop. The item number is 1121 AS.

.

Check out the video for our product as well:

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden